Type 10-R Series Gas/Liquid Separators
 
Flanged • Fabricated Carbon Steel Construction
Value Added Features Available Options
  • Standard and Compact Models
  • Capable of Handling Slugs of Liquids
  • ASME Code Stamp
  • Two 1/2" NPT Water Gauge Connection
  • One 1/2" NPT Vent Connections
  • No Required Maintenance
  • Remove 99% of Liquid & Solid Entrainment
  • Particles Larger than 10 Microns
  • Gas, Steam or Air Applications
  • Support Stand
  • Stainless Steel Construction
  • Multiple Inlets and/or Outlets
  • Sizes Larger than 16"

The Eaton standard size Type 10-R Series Separators are designed for liquid slugs or heavy liquid loads and can be provided with a large reservoir to meet liquid holdup requirements. For applications where space is restricted, a compact model is available.

 

Applications

Type 10-R Series Separators are widely used in the chemical and process industries where large volumes of liquid must be separated from gases. They also may be used as a flash or surge tank, or as a scrubber or demister ahead of steam turbines.

 

Principle of Operation

Eaton Type 10-R Series Separators have two stages for separating large volumes of liquid from a smaller volume of a gas or vapor. In stage one, the flow enters the inlet and is deflected downward by the impingement plate causing it to loose velocity. This results in the majority of the liquid dropping into the reservoir. In the second stage the moisture laden gas passes through a vane element where the remaining moisture is separated and flows down to the reservoir. The separator will remove all liquid and solid entrainment where the particle size is 10 microns or greater.

 

Construction

Type R Separators are constructed in accordance with the ASME Code Section VIII, Division 1 and are code stamped. They are available with 150# slip on raised face flanges rated at 200psi at 300F or with 300# slip on raised face flanges rated at 250psi at 650F. They feature fabricated carbon steel construction and with internal vane blades made of 304L stainless steel.

 

We Can Help

Choosing the right gas/liquid separator can present unique problems not encountered in choosing other pipeline components. Why not take advantage of Eaton’s over 100 years of application experience with gas/liquid separators? Application specialists are available to help you every step of the way… from initial selection, to installation and through start-up…just contact us.

 

Click Here For Brochure

 

For more information, contact us by phone 1-888-924-6233 or by E-mail.
print close